DAILY REPORTS

IRP 1 CCTV server ups input power modification

Posted onApril 26, 2022

ACTIVITY | DAILY REPORTS | DTW | Pappu | Parvez | REPORTS

DTW-123 Inverter Fault and VFD do not Power Up
Posted onDecember 4, 2022December 4, 2022

1.VFD Controller Damage 2. Emergency Switch control Open circuit Fault Found. Now we change a VFD Controller and Maintenance the control circuit Now…

Listen to the Message DTW-123 Inverter Fault and VFD do not Power Up
ACTIVITY | DAILY REPORTS | Jewel | Pappu | Parvez | Pending Issue

IRP-1 to IRP-2 SCADA controlling communication antenna Arrangement work complete.
Posted onSeptember 29, 2022October 12, 2022

Listen to the Message IRP-1 to IRP-2 SCADA controlling communication antenna Arrangement work complete.
DAILY REPORTS | DTW | Parvez

WID577: DTW-204 ACB can not close from SCADA.
Posted onNovember 22, 2023December 11, 2023

Findings: UVR being under voltage, it need a reset to execute Close Command. Action: ACB open/close command relay check. Isolate the physical reset…

Listen to the Message WID577: DTW-204 ACB can not close from SCADA.
ACTIVITY | DAILY REPORTS | Jewel | Pappu | Parvez

4 nos Monitoring Well Level Sensor Installation Complete.
Posted onSeptember 21, 2022September 21, 2022

1 :MW03B 2: MW14A 3:MW08A 4: MW13B

Listen to the Message 4 nos Monitoring Well Level Sensor Installation Complete.
ACTIVITY | DAILY REPORTS | Parvez | REPORTS

Breaker installation for SCADA control Room Monitor.
Posted onDecember 1, 2022December 1, 2022

Breaker installation for SCADA control Room Monitor Done

Listen to the Message Breaker installation for SCADA control Room Monitor.
ACTIVITY | DAILY REPORTS | Jewel | Parvez | REPORTS

IRP-2 Sub-Station Re cleaning
Posted onDecember 13, 2022December 13, 2022

There was so much dust

Listen to the Message IRP-2 Sub-Station Re cleaning

IRP 1 CCTV server ups input power modification

DTW-123 Inverter Fault and VFD do not Power Up

IRP-1 to IRP-2 SCADA controlling communication antenna Arrangement work complete.

WID577: DTW-204 ACB can not close from SCADA.

4 nos Monitoring Well Level Sensor Installation Complete.

Breaker installation for SCADA control Room Monitor.

IRP-2 Sub-Station Re cleaning

Leave a Reply Cancel reply

Join With Us

Similar Posts

Leave a Reply Cancel reply

Join With Us