1. IP Setup


1. IP Setup
1.UTP Cable Change 2.Connector Change 3.IP Setup
ফ্লোট সুইচ কাদার সাথে আটকে যাওয়ার কারণে লো-লো কন্ডিশন দেখায়। পরে এই সমস্যা আমরা আইডেন্টিফাইড করে সমাধান করে দিয়েছি। বর্তমানে ঠিক আছে।
problem found: IRP-1 Backwash holding tank -A pump’s cable terminal box gets short circuit & burn. For instance, a fault signal came in…
Problem: after power up time ACB do not close from the SCADA command.Problem found: 27X M/C Magnetic Contact & AUX CONTACT UNIT Problem…