Logic controller, Modicon M221, 24 IO relay Ethernet

Posted on
Logic controller, Modicon M221, 24 IO relay Ethernet
SL NOParameterDescription
1Range of productModicon M221
2Product or component typeLogic controller
3[Us] rated supply voltage100…240 V AC
4discrete input number14, discrete input conforming to IEC 61131-2 Type 1
5analogue input number2 at 0…10 V
6Discrete output typeRelay normally open
7discrete output number10 relay
8discrete output voltage5…125 V DC
5…250 V AC
9discrete output current2 A
10Discrete I/O number24
11maximum number of I/O expansion module7 for transistor output
7 for relay output
12Supply voltage limits85…264 V
13Network frequency50/60 Hz
14Inrush current40 A
15maximum power consumption in VA58 VA at 100…240 V with max number of I/O expansion module
35 VA at 100…240 V without I/O expansion module
16power supply output current0.52 A 5 V for expansion bus
0.16 A 24 V for expansion bus
17discrete input logicSink or source (positive/negative)
18Discrete input voltage24 V
19Discrete input voltage typeDC
20Analogue input resolution10 bits
21LSB value10 mV
22conversion time1 ms per channel + 1 controller cycle time for analogue input analog input
23permitted overload on inputs+/- 30 V DC for 5 min (maximum) for analog input
+/- 13 V DC (permanent) for analog input
24voltage state 1 guaranteed>= 15 V for input
25voltage state 0 guaranteed<= 5 V for input
26discrete input current7 mA for discrete input
5 mA for fast input
27input impedance3.4 kOhm for discrete input
100 kOhm for analog input
4.9 kOhm for fast input
28response time35 µs turn-off, I2…I5 terminal(s) for input
10 ms turn-on for output
10 ms turn-off for output
5 µs turn-on, I0, I1, I6, I7 terminal(s) for fast input
35 µs turn-on, other terminals terminal(s) for input
5 µs turn-off, I0, I1, I6, I7 terminal(s) for fast input
100 µs turn-off, other terminals terminal(s) for input
29configurable filtering time0 ms for input
3 ms for input
12 ms for input
30output voltage limits125 V DC
277 V AC
31maximum current per output common4 A at COM 2
7 A at COM 0
7 A at COM 1
32absolute accuracy error+/- 1 % of full scale for analog input
33electrical durability100000 cycles AC-12, 120 V, 240 VA, resistive
100000 cycles AC-12, 240 V, 480 VA, resistive
300000 cycles AC-12, 120 V, 80 VA, resistive
300000 cycles AC-12, 240 V, 160 VA, resistive
100000 cycles AC-15, cos phi = 0.35, 120 V, 60 VA, inductive
100000 cycles AC-15, cos phi = 0.35, 240 V, 120 VA, inductive
300000 cycles AC-15, cos phi = 0.35, 120 V, 18 VA, inductive
300000 cycles AC-15, cos phi = 0.35, 240 V, 36 VA, inductive
100000 cycles AC-14, cos phi = 0.7, 120 V, 120 VA, inductive
100000 cycles AC-14, cos phi = 0.7, 240 V, 240 VA, inductive
300000 cycles AC-14, cos phi = 0.7, 120 V, 36 VA, inductive
300000 cycles AC-14, cos phi = 0.7, 240 V, 72 VA, inductive
100000 cycles DC-12, 24 V, 48 W, resistive
300000 cycles DC-12, 24 V, 16 W, resistive
100000 cycles DC-13, 24 V, 24 W, inductive (L/R = 7 ms)
300000 cycles DC-13, 24 V, 7.2 W, inductive (L/R = 7 ms)
34switching frequency20 switching operations/minute with maximum load
35mechanical durability20000000 cycles for relay output
36minimum load1 mA at 5 V DC for relay output
37protection typeWithout protection at 5 A
38reset time1 s
39memory capacity256 kB for user application and data RAM with 10000 instructions
256 kB for internal variables RAM
40data backed up256 kB built-in flash memory for backup of application and data
41data storage equipment2 GB SD card (optional)
42battery typeBR2032 lithium non-rechargeable, battery life: 4 year(s)
43backup time1 year at 25 °C (by interruption of power supply)
44execution time for 1 KInstruction0.3 ms for event and periodic task
45execution time per instruction0.2 µs Boolean
46exct time for event task60 µs response time
47Maximum size of object areas255 %TM timers
512 %M memory bits
8000 %MW memory words
255 %C counters
512 %KW constant words
48Realtime clockWith
49clock drift<= 30 s/month at 25 °C
50regulation loopAdjustable PID regulator up to 14 simultaneous loops
51counting input number4 fast input (HSC mode) at 100 kHz 32 bits
52counter functionA/B
Single phase
Pulse/direction
53integrated connection typeUSB port with mini B USB 2.0 connector
Non isolated serial link serial 1 with RJ45 connector and RS232/RS485 interface
Ethernet with RJ45 connector
54supply(Serial)serial link supply: 5 V, <200 mA
55transmission rate1.2…115.2 kbit/s (115.2 kbit/s by default) for bus length of 15 m for RS485
1.2…115.2 kbit/s (115.2 kbit/s by default) for bus length of 3 m for RS232
480 Mbit/s for USB
56communication port protocolUSB port: USB – SoMachine-Network
Non isolated serial link: Modbus master/slave – RTU/ASCII or SoMachine-Network
Ethernet
57port Ethernet10BASE-T/100BASE-TX 1 port with 100 m copper cable
58Communication serviceModbus TCP server
Modbus TCP slave device
DHCP client
Modbus TCP client
Ethernet/IP adapter
59local signalling1 LED (green) for PWR
1 LED (green) for RUN
1 LED (red) for module error (ERR)
1 LED (green) for SD card access (SD)
1 LED (red) for BAT
1 LED per channel (green) for I/O state
1 LED (green) for SL
Ethernet network activity (green) for ACT
Ethernet network link (yellow) for Link (Link Status)
60electrical connectionRemovable screw terminal block for inputs
removable screw terminal block for outputs
terminal block, 3 terminal(s) for connecting the 24 V DC power supply
connector, 4 terminal(s) for analogue inputs
Mini B USB 2.0 connector for a programming terminal
61maximum cable distance between devicesShielded cable: <10 m for fast input
Unshielded cable: <30 m for output
Unshielded cable: <30 m for digital input
Unshielded cable: <1 m for analog input
62insulationBetween input and internal logic at 500 V AC
Non-insulated between analogue input and internal logic
Non-insulated between analogue inputs
Between supply and ground at 1500 V AC
Between sensor power supply and ground at 500 V AC
Between input and ground at 500 V AC
Between output and ground at 1500 V AC
Between supply and internal logic at 2300 V AC
Between sensor power supply and internal logic at 500 V AC
Between output and internal logic at 2300 V AC
Between Ethernet terminal and internal logic at 500 V AC
Between supply and sensor power supply at 2300 V AC
63MarkingCE
64sensor power supply24 V DC at 250 mA supplied by the controller
65mounting supportTop hat type TH35-15 rail conforming to IEC 60715
Top hat type TH35-7.5 rail conforming to IEC 60715
plate or panel with fixing kit
66Height90 mm
67Depth70 mm
68Width110 mm
69Net weight0.395 kg
70StandardsEN/IEC 61010-2-201
EN/IEC 61131-2
EN/IEC 60664-1
71Product certificationsLR
cULus
IACS E10
CSA
ABS
DNV-GL
EAC
RCM
72Environmental characteristicOrdinary and hazardous location
73resistance to electrostatic discharge8 kV in air conforming to EN/IEC 61000-4-2
4 kV on contact conforming to EN/IEC 61000-4-2
74resistance to electromagnetic fields10 V/m 80 MHz…1 GHz conforming to EN/IEC 61000-4-3
3 V/m 1.4 GHz…2 GHz conforming to EN/IEC 61000-4-3
1 V/m 2…2.7 GHz conforming to EN/IEC 61000-4-3
75resistance to magnetic fields30 A/m 50/60 Hz conforming to EN/IEC 61000-4-8
76resistance to fast transients2 kV (power lines) conforming to EN/IEC 61000-4-4
2 kV (relay output) conforming to EN/IEC 61000-4-4
1 kV (I/O) conforming to EN/IEC 61000-4-4
1 kV (Ethernet line) conforming to EN/IEC 61000-4-4
1 kV (serial link) conforming to EN/IEC 61000-4-4
77surge withstand2 kV power lines (AC) common mode conforming to EN/IEC 61000-4-5
2 kV relay output common mode conforming to EN/IEC 61000-4-5
1 kV I/O common mode conforming to EN/IEC 61000-4-5
1 kV shielded cable common mode conforming to EN/IEC 61000-4-5
0.5 kV power lines (DC) differential mode conforming to EN/IEC 61000-4-5
1 kV power lines (AC) differential mode conforming to EN/IEC 61000-4-5
1 kV relay output differential mode conforming to EN/IEC 61000-4-5
0.5 kV power lines (DC) common mode conforming to EN/IEC 61000-4-5
78resistance to conducted disturbances10 V 0.15…80 MHz conforming to EN/IEC 61000-4-6
3 V 0.1…80 MHz conforming to Marine specification (LR, ABS, DNV, GL)
10 V spot frequency (2, 3, 4, 6.2, 8.2, 12.6, 16.5, 18.8, 22, 25 MHz) conforming to Marine specification (LR, ABS, DNV, GL)
79electromagnetic emissionConducted emissions – test level: 79 dBμV/m QP/66 dBμV/m AV ( power lines (AC)) at 0.15…0.5 MHz conforming to EN/IEC 55011
Conducted emissions – test level: 73 dBμV/m QP/60 dBμV/m AV ( power lines (AC)) at 0.5…300 MHz conforming to EN/IEC 55011
Conducted emissions – test level: 120…69 dBµV/m QP ( power lines) at 10…150 kHz conforming to EN/IEC 55011
Conducted emissions – test level: 63 dBμV/m QP ( power lines) at 1.5…30 MHz conforming to EN/IEC 55011
Radiated emissions – test level: 40 dBμV/m QP class A ( 10 m) at 30…230 MHz conforming to EN/IEC 55011
Conducted emissions – test level: 79…63 dBμV/m QP ( power lines) at 150…1500 kHz conforming to EN/IEC 55011
Radiated emissions – test level: 47 dBμV/m QP class A ( 10 m) at 200…1000 MHz conforming to EN/IEC 55011
80Immunity to microbreaks10 ms
81ambient air temperature for operation-10…55 °C (horizontal installation)
-10…35 °C (vertical installation)
82Ambient air temperature for storage-25…70 °C
83relative humidity10…95 %, without condensation (in operation)
10…95 %, without condensation (in storage)
84IP degree of protectionIP20 with protective cover in place
85Pollution degree<= 2
86Operating altitude0…2000 m
87Storage altitude0…3000 m
88vibration resistance3.5 mm at 5…8.4 Hz on symmetrical rail
3.5 mm at 5…8.4 Hz on panel mounting
1 gn at 8.4…150 Hz on symmetrical rail
1 gn at 8.4…150 Hz on panel mounting
89shock resistance98 m/s² for 11 ms

Ref:

https://www.se.com/ww/en/product/TM221CE24R/logic-controller-modicon-m221-24-io-relay-ethernet/?range=62128-modicon-m221&selected-node-id=12692210272

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *