1.1Nos New Camera Installation 2. UTP Cable Change 3. Connector Change 4. IP setup




1.1Nos New Camera Installation 2. UTP Cable Change 3. Connector Change 4. IP setup




 
			Problem: after power up time ACB do not close from the SCADA command.Problem found: DTW 114 UVR its burn inside circuit . UVR…
 
			Problem: SCADA always showing HI signal. Problem found: 1 Nos float switch problem. HI signal float switch problem & float switch connection terminal…
DTW NO. LIT PIT Comments DTW NO. LIT PIT Comments 101 NOT OK OK 201 OK OK 102 OK OK 202 NOT OK…
After visited to IRP2, we saw that lots of water inside the chamber and the condition of the flow meter flow detector is…
 
			Optical fibber connection, CCTV PoE Switch Onu Inter connection, 5 NOS camera add in Nav-4,
One Comment