Problem: after power up time ACB do not close from the SCADA command.
Problem found: DTW 114 UVR its burn inside circuit . UVR remove and bring it to store.
Similar Posts
- ACTIVITY | DAILY REPORTS | Jewel | Pappu | Parvez
IRP-1 backwash holding tank (2P01A) pump Checking & Problem Found.
problem found: IRP-1 Backwash holding tank -A pump’s cable terminal box gets short circuit & burn. For instance, a fault signal came in…
- ACTIVITY | DAILY REPORTS | DTW | Jewel | Pappu | Parvez | Pending Issue
DTW-117 & 118 UVR Related M/C checking.
Problem: after power up time ACB do not close from the SCADA command. Problem found: 27X Magnetic Contact (M/C) & AUX Contact Unit…
- ACTIVITY | DAILY REPORTS | Jewel | Pappu | Parvez
IRP#1 SLUDGE DRYING BED FAULT SHOWING PROBLEM CHECKING
ফ্লোট সুইচ কাদার সাথে আটকে যাওয়ার কারণে লো-লো কন্ডিশন দেখায়। পরে এই সমস্যা আমরা আইডেন্টিফাইড করে সমাধান করে দিয়েছি। বর্তমানে ঠিক আছে।
DTW-109 Radio communication check by new Antenna installing
Due to facing lots of obstacles in front of line of sight, the radio signal is too much worst
