DTW 201 fiber optic cable Restoration Program

[Best_Wordpress_Gallery id=”1″ gal_title=”DTW 201 fiber optic cable Restoration Program”]

Posted onDecember 4, 2022December 4, 2022

1.VFD Controller Damage 2. Emergency Switch control Open circuit Fault Found. Now we change a VFD Controller and Maintenance the control circuit Now…

Posted onNovember 24, 2022November 24, 2022

IRP- 2 1nos CC Camera Maintenance done, there was connector problem. now IRP-2 Sub-Station all CC Camera in operation.

Posted onNovember 29, 2022November 29, 2022

IRP-1 360° Dome camera lens cleaning done. All panel brush to reduce dust. There was so much dust

Posted onDecember 6, 2022December 6, 2022

IRP-1 SDB Additional Dewatering Pump check: 1. Motor winding Resistance check (Normal) 2. Motor Ampere check (Normal) 3. MC coil check ( little…

Posted onOctober 10, 2022October 11, 2022

Problem: after power up time ACB do not close from the SCADA command.Problem found: DTW 114 UVR its burn inside circuit . UVR…

Posted onNovember 22, 2023December 11, 2023

Findings: UVR being under voltage, it need a reset to execute Close Command. Action: ACB open/close command relay check. Isolate the physical reset…

One Comment

admin says:

April 26, 2022 at 11:33 pm

Thank you for the appreciation, we are trying to do the best

Reply