DTW101
Problem:
Dtw-101 Sometimes the pump stops suddenly. This has happened time and time again. There is no fault in SCADA. Field check also found no fault. UVR/Inverter/ GMAC /Terminal Box/ Flow/ Ampere/Hz etc. are all normal
Team ICE identification:
Terminal Damage problem found in UVR
Required Item:
| SL | Product Name | Model | Quantity | Remarks |
|---|---|---|---|---|
| 1 | UVR | 01 | Not available in our skwp store | |
| 2 | ||||
| 3 | ||||
| 4 |
DTW107
Problem:
107 Communications were already very poor. Still the operation could be done remotely. Even then the communication frequency fluctuated greatly. ICE Team on DTW-107 works on communication, it reduces frequency fluctuate and graph is normal. SCADA communication looks normal but no graphical view changes. Eg: SCADA display does not show any change of pump on/ off/fault/ Hz/ampere/ACB status etc.
Team ICE identification:
week signal found adjust the antenna. now radio signal normal and stable, DTW is locally opera table.
Now PLC Related Problem
Required Item:
| SL | Product Name | Model | Quantity | Remarks |
|---|---|---|---|---|
| 1 | ||||
| 2 | ||||
| 3 | ||||
| 4 |
DTW109
Problem:
The poor communication conditions are increasing day
by day, resulting in increased frequency fluctuations.
For which remote operation is off
Team ICE identification:
DTW-109 Radio communication check by new Antenna installing
Due to facing lots of obstacles in front of line of sight, the radio signal is too much worst
Required Item:
| SL | Product Name | Model | Quantity | Remarks |
|---|---|---|---|---|
| 1 | ||||
| 2 | ||||
| 3 | ||||
| 4 |
DTW112
Problem:
Scada Pack Problem.
Team ICE identification:
Scada Pack Problem.
Required Item:
| SL | Product Name | Model | Quantity | Remarks |
|---|---|---|---|---|
| 1 | Scada Pack | Schneider | 01 | Not available in our skwp store |
| 2 | ||||
| 3 | ||||
| 4 |
DTW123
Problem: VFD Controller Problem
ICE Team on DTW-123 works on communication, it
reduces frequency fluctuate and graph is normal.
SCADA communication looks normal but no graphical
view changes. Eg: SCADA display does not show any
change of pump on/ off/fault/ Hz/ampere/ACB status
etc.
Team ICE identification:
DTW-123 Inverter Fault and VFD do not Power Up
Now we change a VFD Controller and Maintenance the control circuit. Now DTW-123 is Locally Operated.
Required Item:
| SL | Product Name | Model | Quantity | Remarks |
|---|---|---|---|---|
| 1 | VFD Controller | Schneider | 01 | Not available in our skwp store |
| 2 | ||||
| 3 | ||||
| 4 |
DTW206
Problem:
Scada Pack & Radio modem Problem.
Team ICE identification:
Scada Pack & Radio modem Problem. (Damage by thundering)
Required Item:
| SL | Product Name | Model | Quantity | Remarks |
|---|---|---|---|---|
| 1 | Scada Pack | Schneider | 01 | Not available in our skwp store |
| 2 | Radio modem | Schneider | 01 | Not available in our skwp store |
| 3 | ||||
| 4 |
DTW105
Problem:
Rehabilitation work on going.
Team ICE identification:
Operation stop due to rehabilitation work
at: 08.09.2022
Required Item:
| SL | Product Name | Model | Quantity | Remarks |
|---|---|---|---|---|
| 1 | ||||
| 2 | ||||
| 3 | ||||
| 4 |
DTW202
Problem:
Rehabilitation work on going.
Team ICE identification:
Operation stop due to rehabilitation work
at: 12.11.2022
Required Item:
| SL | Product Name | Model | Quantity | Remarks |
|---|---|---|---|---|
| 1 | ||||
| 2 | ||||
| 3 | ||||
| 4 |
DTW207
Problem:
Rehabilitation work on going & Scada Pack Problem
Team ICE identification:
DTW-207 Rehabilitation will takes more time that why we transfer the SCADAPACK to DTW-202 for remotely operation
Required Item:
| SL | Product Name | Model | Quantity | Remarks |
|---|---|---|---|---|
| 1 | Scada Pack | Schneider | 01 | Not available in our skwp store |
| 2 | ||||
| 3 | ||||
| 4 |
