Problem: OGR Booster pump E running time Moter current high (682 Amp) showing than pump stop that time frequency is 0.3 Hz (Abnormal).
Problem found: Need to check deeply.
Similar Posts
DTW-118,122,220 & 205 automatic start-stop problem solved
Posted onDue to solving those problems : Modbus ground connection check. VFD frequency regulator loose connection check. SPD check . RJ-45 connector check. Cable…
- ACTIVITY | DAILY REPORTS | DTW | Parvez | REPORTS
DTW-221 Modbus Serial communication Problem
Posted onwhen we install new VFD controller , the HMI Graph do not change from scada that time . so we reinstall old VFD…
DTW-103 VFD Controller Install
Posted on1.DTW-103 New VFD Controller Install 2. Parameter set 3.Serial Communication Cable Wiring Work Done
ACTIVITY | DAILY REPORTS | MOV | Pappu | ParvezIRP-2 3V07A MOV Reset, reprogramming and configuration work complete.
Posted onProblem: This MOV is abnormal working. MOV Open time & close time 0% to 100% value not showing. IRP-2 3V07A MOV Reset, reprogramming…
DTW-122 Grass plantation
Posted onThere is so much dust so we Plant grass to prevent road side dust
ACTIVITY | DAILY REPORTS | DTW | Parvez | REPORTSDTW-211 CCTV power is taken from main ups
Posted onDTW-211 CCTV power is taken from main ups. Do not get sufficient backup from ups and frequently fault occurs.
