Findings: The cable was disconnected.
Action taken: Dressing the cable and reconnect.
YIHUA 853AAA+Programming Controlled Welding Station| MCS
There is so much dust so we Plant grass to prevent road side dust
26.11.2023 Today SEL manpower change the e-PRV CRD spring. And we check the e-PRV functionality is okay or not okay. MOV-1 50% Open,…
Findings: The relay always stay energize getting power from Digital Output I/O card. So sandfilter can’t maintain the backwash sequence. That’s why ,…
1. connector change 2. IP Setup
How the cable was disconnected?
There isn’t the terminal box placed properly. & the cable was so thin. Need to change the terminal box.