IRP-1 SDB Additional Dewatering Pump check: 1. Motor winding Resistance check (Normal) 2. Motor Ampere check (Normal) 3. MC coil check ( little weak found but workable) Now Normal
Similar Posts
- ACTIVITY | DTW | Uncategorized
WID585:Dtw-117 e-PRV CRD isn’t functioning properly. SEL manpower need to check.Now e-PRV CRD & flowmeter works
Posted on26.11.2023 Today SEL manpower change the e-PRV CRD spring. And we check the e-PRV functionality is okay or not okay. MOV-1 50% Open,…
CCTV Maintenance At DTW-110
Posted on1.1 Nos New Camera Installation . 2. IP Setup
DTW-109 Radio communication check by new Antenna installing
Posted onDue to facing lots of obstacles in front of line of sight, the radio signal is too much worst
CCTV Maintenance At DTW-209
Posted on1.Cable connector change 2. IP Setup
Instrumentation Findings of Month (July,2022)
Posted onSL/NO PROBLEMS TAG LOCATION REMARK 1 When the pump runs, the pump Motor + MOV runs together. Which does not follow the normal…
- ACTIVITY | DAILY REPORTS | DTW | REPORTS
IRP-2 All FCP panel cleaning
Posted onIRP 2 FCP ক্লিনিং কাজ সম্পন্য হয়