problem found: IRP-1 Backwash holding tank -A pump’s cable terminal box gets short circuit & burn. For instance, a fault signal came in SCADA. pump coil is ok. LOP controlling cable condition is very bad.
Similar Posts
Breaker installation for SCADA control Room Monitor.
Posted onBreaker installation for SCADA control Room Monitor Done
- ACTIVITY | DAILY REPORTS | DTW | REPORTS
DTW-221 Modbus Serial communication Problem
Posted onwhen we install new VFD controller , the HMI Graph do not change from scada that time . so we reinstall old VFD…
OGR Panel Room AC Cold Air Does Not Come Out.
Posted onAC Problem solved & Running. The functions of the remote cannot be changed. AC will automatically change after 6 hours. Everything has been…
IRP-2 Sand Filter All Ultrasonic Sensor Cleaning
Posted onIRP-2 Sand Filter All Ultrasonic Sensor Cleaning Complete.
1 x 2 PLC Fiber Splitter, Steel Tube, Bare Fiber 250μm, No Connector
Posted onPLC-102-MM-90-SCA-15 Specification SL No Specification criteria Specifications 1 Package Style Mini Module 2 Configuration Type 1x 2 3 Fiber Grade G.657A1 4 Connector…