Due to solving those problems :
- Modbus ground connection check.
- VFD frequency regulator loose connection check.
- SPD check .
- RJ-45 connector check.
- Cable check.
- VFD controller Check.
- System Earth Resistance Check etc.
Due to solving those problems :
1.1Nos New Camera Installation 2. UTP Cable Change 3. Connector Change 4. IP setup
CCTV Pool adjustments 1 new camera installation 1 new PoE Switch installation UTP cable change IP Setting
PIT Interlock
Problem: after power up time ACB do not close from the SCADA command.Problem found: DTW 114 UVR its burn inside circuit . UVR…